In Simple Terms
Voyager 1 is now so far from Earth that a message takes 24 hours to reach it, while Voyager 2 is expected to reach that distance around 2035. The spacecraft took different routes to explore different planets, which left them moving at different speeds. Even with dwindling power, both still send scientific information from far beyond the Sun’s neighborhood.
A Distance Measured in Light-Time
On November 18, Voyager 1 reaches a milestone that is hard to picture in everyday terms: it is so far from Earth that light itself takes a full day to travel between the spacecraft and our planet. This is more than a symbolic distance. Voyager 1 is about 16,094,799,096 miles, or 25,902,068,356 kilometers, away. That is why the achievement is described as reaching one “light-day.”
A Distance Measured in Light-Time
Here, a light-day is not a measure of time but a way to describe how far light travels in 24 hours. Since light moves at about 300,000 kilometers per second, that distance works out to roughly 25.9 billion kilometers. When mission controllers send Voyager 1 a command, it does not arrive right away: the signal takes about a full day to get there. If the spacecraft sends a reply, that takes roughly another day to return, so a question-and-answer exchange can last about 48 hours.
This delay changes how the spacecraft is operated. Controllers cannot treat it like a nearby device that is waiting for immediate instructions. Instead, they must plan commands in advance, wait for them to arrive, and then wait again for the data to come back. Reaching a light-day does not mean Voyager 1 has stopped moving or gone out of communication range. It simply illustrates the vastness of the space between the spacecraft and Earth—and the ability of Earth’s communications network to detect a faint signal after it has traveled such an enormous distance.
NASA plans to mark the milestone with a symbolic event, inviting people to aim flashes of light toward the sky in Morse code. These flashes are not a way to send a command to the distant spacecraft. Given the distance and conditions, they are a public celebration, not a practical means of communicating with Voyager 1. The event gives people a chance to imagine what a distance measured in light-time means: a signal traveling at the fastest known speed still needs 24 hours to arrive.
Two Twins, Two Different Missions
Voyager 2 launched first, on August 20, 1977, followed by Voyager 1 on September 5 of the same year—a gap of about two weeks. Both missions were designed to explore Jupiter and Saturn, but their plans were not quite the same. Voyager 2’s route left open the possibility of continuing on to Uranus and Neptune if resources allowed, and that is exactly what happened. A relatively rare alignment of the outer planets helped make it possible to plan visits to these worlds on a single journey.
Voyager 1, by contrast, was sent on a fast flyby of Jupiter and Saturn, with special interest in Saturn’s rings and its moon Titan. Titan was intriguing because of its prebiotic chemistry: the ingredients and chemical processes that may help scientists understand the conditions that come before life appears. That does not mean life was discovered there. After passing Saturn, Voyager 1 headed out of the plane in which the planets orbit, while Voyager 2 continued its tour toward the more distant planets.
The choice of routes affected which spacecraft reached Jupiter first. Although Voyager 2 had left Earth earlier, Voyager 1 arrived at Jupiter on March 5, 1979, while Voyager 2 did not arrive until July 9 of that year, about four months later. The lead was not determined by launch date alone: Voyager 1 had been given a faster route, allowing it to pull ahead. The gap between the spacecraft had begun early, before their different planetary flybys made it even more pronounced.
How the Planets Became Speed Boosters
Both spacecraft used what is known as a gravity assist. A spacecraft passing near a moving planet can have its speed and direction changed by the planet’s gravity. In simple terms, it is a way to pick up some of the planet’s motion rather than relying on fuel alone. The planet does not give the spacecraft energy without a physical exchange; its own motion changes by a tiny amount. But because the planet is vastly more massive than the spacecraft, the change in the planet’s motion is so small that it cannot be measured in practice.
During Voyager’s Jupiter encounters in 1979, the planet’s speed decreased by an estimated 10^-24 kilometers per second, a change too tiny to detect. Each spacecraft, in contrast, gained about 10 kilometers per second, or about 6.2 miles per second. That is a substantial boost for a spacecraft, helping send it onto a fast route toward Saturn and beyond. These maneuvers also save fuel, because the rockets do not have to carry enough fuel to produce all the required speed on their own.
After Jupiter, Voyager 2 continued to benefit from its planetary encounters. Estimates of the speed changes along its route suggest that it gained about 10 kilometers per second at Jupiter, about 5 at Saturn, and then roughly 2 at Uranus. Its final encounter, with Neptune, was different: the maneuver ended with a loss of about 2 kilometers per second rather than a new boost. A planetary flyby does not always speed a spacecraft up; the result depends on the chosen route and the direction the spacecraft travels afterward.
The Price of Visiting Triton—and the Speed Gap
At Neptune, one of Voyager 2’s goals was to pass near Triton, the planet’s largest moon. To make that route possible, the spacecraft traveled above Neptune’s north pole and then changed direction, beginning to move away from the plane of the solar system. This path allowed Voyager 2 to study Triton, but it also affected the spacecraft’s speed: during the Neptune encounter, it lost about 2 kilometers per second. That was not a malfunction or a sign that the spacecraft had failed. It was a consequence of the geometry of its flyby and the direction it took afterward.
The example shows the trade-off between pursuing several scientific goals and choosing the fastest route outward. The missions were not designed as a race between two spacecraft. Their purpose was to gather information about different worlds within the limits of available fuel, power, and opportunities. Voyager 2 visited Uranus and Neptune, planets no other spacecraft had previously visited up close, while Voyager 1 went to Titan and took a faster route into deep space. Each spacecraft created its own scientific record, but they did not end up traveling at the same speed.
Voyager 1 is now moving outward at a rate of about 3.5 astronomical units per year, while Voyager 2 covers about 3.1 astronomical units each year. An astronomical unit is the average distance between Earth and the Sun. So these figures mean that Voyager 1 moves away by about three and a half times that distance each year, and Voyager 2 by about three and a tenth times. The difference—0.4 astronomical units per year—may seem modest over a single year, but it adds up over time and means the spacecraft will reach a light-day from Earth years apart.
Out Into Interstellar Space
Voyager 1 entered interstellar space in 2012, followed by Voyager 2 in 2018. That does not mean either spacecraft has left the galaxy or is close to another star. It means each crossed the outer boundary of the bubble dominated by the solar wind and entered a region more strongly influenced by the material between stars. “Interstellar” describes a distant location beyond the Sun’s direct influence, not a short trip to the stars or an exit from the Milky Way.
The spacecraft are valuable because they continue to send measurements from an environment no other comparable spacecraft has reached. Their scientific instruments work in conditions far from the Sun, and their data help researchers study the transition from the region around the solar system into interstellar space. But the spacecraft’s long lives do not mean every instrument will keep working forever. The nuclear power source aboard each one is gradually weakening, making careful management of electricity essential to keeping the mission going.
Managing Power to Extend the Mission
The mission team at NASA’s Jet Propulsion Laboratory is coping with limited power by gradually switching off some instruments when needed. The aim is to reduce electricity use while preserving as much capacity as possible to collect data and send it back to Earth. According to the mission’s projections, Voyager 1 may be able to keep operating through the 2030s, provided its remaining nuclear power is sufficient. This is a possibility that depends on available power, not a guaranteed end date for the mission or a promise that every instrument will work until then.
The team has also carried out a procedure called the “Big Bang” on both spacecraft to redistribute the available power among their systems in a way that helps keep them running. The name does not refer to an actual explosion or a physical event in space; it describes an operational step to manage electrical resources. By turning off some instruments and adjusting how power is allocated, engineers are trying to extend the time during which the probes can send scientific information. Keeping two spacecraft launched in 1977 operating at distances where their signals take many hours to travel requires a careful balance between the power they use and the data they can provide.
Why Voyager 2 Won’t Reach the Milestone at the Same Time
According to the mission estimate, Voyager 2 will not reach a distance of one light-day from Earth until around 2035—about a decade after Voyager 1. The difference is not surprising when the details of the journeys are considered together: Voyager 2 launched first but followed a longer route to visit Uranus and Neptune, and its Neptune maneuver cost it about 2 kilometers per second in speed. Voyager 1, by contrast, had a faster route and headed out of the plane of the planets after its Saturn mission.
But asking simply which spacecraft is faster does not tell the whole story. Their different speeds are the immediate result; the underlying cause lies in decisions made to pursue different scientific goals. Voyager 2 was not merely a slower version of Voyager 1. Its route was chosen to allow visits to additional worlds, while Voyager 1’s was designed to take it outward more quickly. As a result, each spacecraft became an independent window onto a different part of the planets and the space around them.
The Bottom Line
When Voyager 1 reaches a distance of 16,094,799,096 miles, or 25,902,068,356 kilometers, the time light takes to travel becomes a practical measure of how far away the spacecraft is: 24 hours one way. Voyager 2 is not expected to reach that milestone until around 2035. The gap reflects the spacecraft’s different routes, the choices made between traveling quickly and visiting additional planets, and the effects of gravity assists. Those encounters boosted both spacecraft on most of their routes, but Voyager 2 lost about 2 kilometers per second at Neptune.
The missions have stretched across decades of exploration, from Voyager 2’s launch on August 20, 1977, followed by Voyager 1’s launch on September 5, to Voyager 1’s entry into interstellar space in 2012, followed by Voyager 2’s in 2018. Their continued work now depends on conserving power and switching off some instruments so others can keep operating. Signals may take a long time to arrive, and power is limited, but both spacecraft still carry measurements from distant regions. The light-day milestone offers a vivid way to grasp just how far humanity has traveled through them.