In Simple Terms
Two researchers shared a major science prize by finding new ways to understand plastic. One is exploring how to change a common plastic so its behavior can be adjusted after use. The other is studying how tiny reinforcing fibers line up as plastic is made. Both projects could help improve materials and how manufacturers use them.
An Unprecedented Tie for the Gold Thesis Award
For the first time in the history of the Dutch Polymer Institute’s Gold Thesis Award, the 2026 winner was not a single researcher. Amelie Fox and Thijs Eijckelmaijers shared the honor after receiving the same overall score. The decision drew on more than academic achievement alone: evaluators considered the scientific value of each project and its relevance to industry, while attendees at the institute’s autumn meeting in Amsterdam also had a say.
The tie highlights the breadth of polymer science. The challenge is not just to invent new materials; researchers also need to understand what happens inside them during manufacturing, how their properties can be controlled, and what options exist when they reach the end of their useful life. Fox’s research explored ways to modify polyethylene at the molecular level, while Eijckelmaijers studied how fibers suspended in molten polymers move and align as the material flows.
The result was announced after the four finalists presented their work at the Dutch Polymer Institute (DPI) autumn meeting in Amsterdam on November 17, 2026. The joint win followed an evaluation that gave the two researchers identical overall scores. The institute says this is the first time two candidates have shared the award because their final scores matched—not because the prize had been split in advance.
The institute announced the award on November 20, 2026. What makes the result noteworthy is not simply that a tie is rare. The winning projects address complementary challenges in materials science: how to give a polymer an additional function that could help shape what happens to it after use, and how to understand the internal structure of a fiber-reinforced material well enough to predict its performance more reliably.
Changing Polyethylene from Within
Amelie Fox won for her thesis on controlled cobalt-mediated radical copolymerization and terpolymerization, aimed at incorporating carbon monoxide into polyethylene chains. The research was carried out as part of the INRAD project at the University of Konstanz. Its central idea is to introduce chemical units into the polymer chain itself, rather than simply treating the material’s surface or blending in a separate ingredient.
Polyethylene is one of the most widely produced and used plastics in the world. Its practical properties have made it ubiquitous, but changing such a common material presents a particular challenge: any useful new feature must be added while keeping the material’s potential for use throughout its life cycle in view. Fox’s research explores a chemical route for adding ketone groups within the chain, making it possible to modify the material’s properties at the level of its molecular structure.
According to the institute’s account of the findings, these added groups may make it possible to control some of polyethylene’s properties, including how readily it breaks down when exposed to light. That does not mean the material will automatically break down in every environment, or that the plastic-waste problem has been solved. Rather, its structure now includes functional sites that can affect how it behaves. This line of research may help scientists think about how to design polymers and what happens to them after use.
The significance of the approach is that it builds a function into the material at its source—in its molecular arrangement—instead of adding that function separately at a later stage. In principle, being able to change a polymer’s properties could give researchers and manufacturers more options for tailoring it to a particular purpose. But turning a research result into a commercial material requires testing its performance and durability, assessing whether it can be manufactured, and planning for what happens at the end of its useful life. The information available about the thesis does not claim that these steps have been completed.
According to the institute, the work is connected to a broader ambition: making the world’s most widely produced polymers easier to recycle and reuse. That is a long-term research goal, not an announcement of a ready-to-use recycling system. Adding a chemical function may offer a starting point for investigating how to handle a material after use, but its environmental benefits will ultimately depend on how it is produced, used, collected, and processed in practice.
From Molten Flow to Fiber Alignment
The second winner, Thijs Eijckelmaijers, received the award for a thesis on fibers suspended in molten polymers, focusing on how they move and align and how that behavior relates to the material’s rheology. The work was conducted through the ANGLE project at Eindhoven University of Technology. Rheology is the study of how materials flow and deform under force. It matters here because polymers can be molten during manufacturing, and the resulting flow can change the positions and orientations of fibers within them.
When studying fiber-reinforced composite materials, knowing the type of polymer or the type of fiber alone is not enough to understand the final result. The distribution and orientation of fibers within a material can affect how a finished part responds to forces. As molten polymer flows during manufacturing, fibers may line up in different ways depending on the flow and the material’s properties. The thesis therefore examined the relationship between flow conditions, the behavior of the molten polymer, and the motion that determines fiber orientation.
Eijckelmaijers combined experiments with numerical methods to study these relationships in different types of polymer melts. The work covered shear flows, in which layers of material slide past one another, and extensional flows, in which the material stretches in the direction of flow. Comparing these two types of flow offers a broader understanding of how fibers and polymers respond to different processing conditions, rather than assuming that every manufacturing process affects them in the same way.
One practical benefit of this research could be a greater ability to predict and control fiber alignment during manufacturing. If the flow conditions can be linked to what happens to fibers inside the melt, production steps may be adjusted to help produce composite parts with suitable mechanical properties. Better predictions could also make processing more consistent and easier to anticipate. But, as the institute describes it, the thesis provides understanding and tools for prediction and control; it does not mean that every fiber-reinforced product is now guaranteed to perform as intended or that manufacturing challenges have disappeared.
The two projects begin from different points. Fox changed polyethylene’s chemical composition by adding functional groups within its chains, while Eijckelmaijers studied how the internal structure of a composite takes shape as polymer flows. Yet both go beyond describing a material in general terms to examine the details that give it its properties: molecular bonds and composition in the first case, and fiber orientation and flow behavior in the second.
How Was the Award Decided?
The four finalists were selected by the Dutch Polymer Institute’s scientific advisors, Professors Costantino Creton and Bernhard Rieger. The selection was based on two criteria that the institute considers central to research evaluation: scientific excellence and the relevance of the work to issues important to industry. The finalists then presented their research to participants at the autumn meeting on November 17, and the audience’s vote was added to the evaluation.
The presentations were therefore more than a chance to showcase the theses; they were part of the process for choosing the winner. The final result combined scientific assessment, consideration of industrial relevance, and the audience’s opinion. Once these elements were tallied, Fox and Eijckelmaijers finished with the same score. This process helps explain how two projects on different subjects could both win: the award was not restricted to a single branch of polymer science, but assessed the quality and importance of the research as well as its potential connection to real-world applications.
Creton noted how difficult it was to narrow the field to four finalists, given the strength of research across many areas of polymer science, particularly work that offers new scientific insights. Rieger, meanwhile, pointed to the importance of connections to industrial challenges in the nominations. Together, these comments reflect the award’s deliberate balance: scientific innovation matters, and in this context its value is strengthened when it can address practical questions involved in developing and processing materials.
Four Projects, One Broader Picture
Alongside the winners, the shortlist included Lorenzo Merlonghi, from the MuMPoL project at the University of Bologna, for research on hydrogen transport through semicrystalline polymers. Francesca Gentili, from the PERMANENT project at the University of Salerno, was also nominated for work on biaxially oriented, polyethylene-based mono-materials. All four finalists presented their research to scientists and industry partners at the Amsterdam meeting.
The topics on the shortlist reveal the range of questions being explored in polymer science: how molecules move through a material’s structure, how to design materials with a defined composition, how to modify a polymer chain, and how to understand fiber alignment during processing. The 2026 award spotlighted Fox’s and Eijckelmaijers’s projects because they received the same overall score—not because the other topics were less important or because the institute published a detailed ranking of the remaining finalists.
The fact that the finalists came from different universities and projects also illustrates the collaborative research landscape behind the award. The theses are connected to academic institutions and named research projects, and their results are presented to an audience that brings together specialists and industry partners. In this case, the institutions involved ranged from the University of Konstanz and Eindhoven University of Technology to the University of Bologna and the University of Salerno, with each finalist linked to a specific research project.
The Bottom Line
The Dutch Polymer Institute’s 2026 Gold Thesis Award ended in its first-ever joint win after Amelie Fox and Thijs Eijckelmaijers received the same overall score. As part of the INRAD project at the University of Konstanz, Fox studied how to add ketone groups to polyethylene chains through controlled polymerization—a direction that could allow the material’s properties, including its response to light, to be adjusted and support research into better ways of handling it after use. Eijckelmaijers, working on the ANGLE project at Eindhoven University of Technology, investigated how different flows of molten polymers affect fiber alignment in composites, using experiments and numerical calculations.
The decision followed an assessment of scientific excellence and industrial relevance, along with a vote by attendees at the autumn meeting in Amsterdam on November 17, 2026. The award was announced on November 20. From changing a material at the level of its chains to understanding how its internal structure forms during manufacturing, the two projects show how different scientific questions can serve a shared goal: making polymers’ properties and behavior easier to understand and control, while keeping practical use and reuse open to further research and development.