Skip to content

Windows That Fight the Weather: Can Smart Glass Cut Building Energy Use by 34%?

In Simple Terms

Ordinary windows let heat move in and out whether we want them to or not. New kinds of glass can adjust how much sunlight and heat pass through, helping buildings stay comfortable and potentially use less energy. Early results look promising, but these windows still need to prove they can be made affordably and keep working for decades.

Why Ordinary Glass Falls Short

A window may look simple, but it can be one of the weakest points in a building’s ability to control heat. Sunlight can stream inside when we would rather keep a room cool, while warmth escapes outdoors when temperatures drop. As glass façades become more common in homes and offices, materials engineers are looking for ways to make windows adapt to the season and the weather instead of behaving the same way all year.

A scientific review by Young Jong and Song Hun Koo, published in Communications Materials in 2026, surveys several ways to turn glass into a material that can manage light and heat. The goal is not simply to darken or warm a window. It is to control which wavelengths pass through, balancing indoor comfort with the benefits of natural light.

Why Can’t Ordinary Glass Do the Job?

Windows exchange heat with their surroundings in several ways. On a sunny day, solar energy passes through the glass and warms a room, potentially forcing the air-conditioning system to run longer. In cold weather, heat moves from indoors to outdoors, increasing the need for heating. Condensation or frost on a surface can also obscure the view—a problem that goes beyond inconvenience in vehicles and other settings where clear vision matters.

Rear-window defrosters in cars offer a familiar example of how glass can be heated: electricity flows through resistive wires, producing heat that clears fog or ice. But a heater or fixed coating cannot adapt to changing seasons. A building may need to absorb heat at one time and reject it at another, all while admitting an appropriate amount of daylight. That is why researchers are developing glass that can control both heat and light.

An important part of the challenge is that sunlight is not a single band of radiation. Visible light helps illuminate a space, while near-infrared radiation carries energy that can warm it. Long-wave infrared radiation, meanwhile, contributes to heat exchange between surfaces and their surroundings. Selectively allowing or blocking certain wavelengths may therefore work better than shutting out all radiation indiscriminately.

Different Ways to Change How Glass Performs

The review groups the technologies according to whether they are designed mainly to heat glass, cool it, or change its optical and thermal properties in response to a particular stimulus. Some need electricity or another external trigger to operate; others rely on the properties of the material itself and do not require a continuous energy supply. No single technology does everything: the best choice depends on the climate, the building’s design, and how it will be used.

One example of active heating uses networks of very fine, relatively transparent silver wires that generate heat when electric current passes through them. Other designs use layered combinations of oxides and metals, such as a stack of indium tin oxide, silver, and indium tin oxide. Researchers have also studied a flexible insulating gel placed between two ionic electrodes, which can heat glass evenly while keeping it largely transparent.

Active options also include thermoelectric units based on the Peltier effect, which moves heat when electricity is applied. These units have been studied in ventilated windows and tested in designs paired with materials that store heat as they change state. In principle, this combination can provide thermal control while also storing some energy, rather than merely changing the surface temperature in the moment.

Passive approaches use the properties of a coating or material without requiring continuous electrical power. Some transparent conductive oxides, including hydrogen-doped indium oxide, can selectively control which radiation passes through glass. Nanoscale coatings made from carbon-doped amorphous boron nitride can also reduce radiative heat loss in the mid-infrared range.

Other materials take a different approach: they capture solar energy and convert it into heat. These designs use materials that absorb parts of the invisible spectrum, such as MXene-based coatings or composite cellulose films. At the other end of the spectrum, radiative-cooling windows let visible light pass through while releasing heat toward the sky through an atmospheric window between 8 and 13 micrometers. Under favorable weather conditions, this can cool a surface below the temperature of the surrounding air.

Some windows change their properties in response to a specific trigger. Electrochromic systems change appearance when electrically activated, while mechanically responsive materials can alter their light transmission under pressure. Studied examples include a thermal gel containing heavy water and metal oxides that change color in response to light and can then return to their previous state. These different responses give designers options for tailoring a window to the kind of control they need.

What the Numbers Reveal About the Promise—and Limits—of These Materials

In one transparent-heater design, a silver-wire network achieved a sheet resistance of 4.5 ohms per square while transmitting about 73% of visible light. When a voltage of 4 volts was applied, its surface temperature reached 102 degrees Celsius. The result shows that a thin layer can let some light through while producing substantial heat, although the operating temperature needed in practice depends on the application.

Insulating-gel heaters achieved more than 90% transparency and distributed heat evenly. However, operating the device at a temperature of 45 degrees Celsius required an alternating voltage of about 100 volts. The review identifies this relatively high voltage as a drawback compared with Joule heaters, which operate at lower voltages. The example illustrates a practical trade-off: a design may offer excellent transparency and even heating but require changes to its power supply or how it is built into a window.

For hydrogen-doped indium oxide glass, solar energy transmittance reached 0.84, while its emissivity in the mid-infrared range was 0.12. The researchers reported spectral selectivity of up to 7.2, an indicator of how differently the material handles separate parts of the spectrum. This selectivity could help visible light pass through while limiting some forms of heat transfer, rather than making the glass opaque.

In a solar-heat-capturing design, a single layer of MXene was about 2.5 nanometers thick and transmitted roughly 82.5% of visible light. When sunlight fell on its surface, the temperature rose by about 25 degrees Celsius. Adding a transparent, oil-infused PDMS layer enabled the prototype to clear ice in about 85 seconds at a temperature of minus 20 degrees Celsius. The experiment points to a possible way to combine solar heating and de-icing without completely sacrificing the view through the glass.

One notable development is the multiband electrochromic device. Rather than simply changing how dark a window becomes, it can separately control visible light, solar heat, and thermal emission. Three-band prototypes changed visible-light transmittance by about 41% and near-infrared transmittance by about 54%, while changing thermal emissivity by 0.35. In building-level simulations, this control could cut annual energy use for heating, ventilation, and air conditioning by up to 34% compared with commercial low-emissivity glass. This is a simulated result, not a guarantee that every building would achieve the same savings.

From Building Façades to Cars and Greenhouses

The usefulness of smart glass depends on the climate and location, so there is no single savings figure that applies to every building. In a simulation of selective electrochromic glass, total annual energy use fell by about 16% in a hot, dry city and by about 20% in a humid subtropical city. Thermochromic glass, by comparison, delivered savings in the single digits in these cases. The differences show that window design, local climate, and the way a building’s systems are operated all affect the outcome.

In cars, transparent conductive films can clear condensation from windshields without distorting the view. A prototype radiative-cooling film also lowered the temperature inside a parked car by about 8 kelvin. This matters because a car parked in the sun can heat up quickly; the film is designed to release some of that heat while keeping the surface transparent.

Potential uses extend beyond large windows. A radiative-cooling lens has been used in smart glasses for augmented and virtual reality to carry heat away from a small projector without fans or bulky heat pipes. Researchers have also studied transparent films for flexible display covers, designed to remove heat generated by internal components while keeping the image visible. These examples do not mean such products are widely available commercially, but they show that transparent thermal control could also be used in small devices.

For greenhouses, researchers have designed polymer films that let through the visible wavelengths useful for plant growth while reflecting parts of the green and near-infrared ranges that contribute to heating. Field tests found lower greenhouse temperatures and a reduction in evaporation of water from the soil of up to about one-third. Lowering heat and water loss could help greenhouse operators manage growing conditions, though the needs of specific crops and local conditions still matter.

The Biggest Hurdle: A Window Built to Last for Decades

Laboratory results and simulations are only a first step. Windows installed in buildings must work across large areas with uniform properties, not just in small samples. A building window is also expected to maintain its performance over a service life of 20 to 30 years. That is a demanding standard for materials exposed every day to sunlight, moisture, temperature swings, and mechanical stress.

Possible causes of deterioration include repeated movement of ions into and out of some layers, coatings separating from the surface, tiny cracks forming, exposure to ultraviolet light, moisture leaking in, and repeated cycles of heating and cooling. Any of these could reduce transparency, weaken control performance, or destabilize the layers. Designs will need reliable sealing, chemically stable coatings, and structures that can withstand stress without cracking or coming apart.

Moving from prototypes to production will also require making large panels while maintaining consistent properties from edge to edge. Even small variations across a window can affect light transmission or heat distribution. A small prototype passing a short test is not enough: researchers must assess performance under changing operating conditions, over long periods, and in real buildings across a range of climates.

Windows That Make Decisions Alongside the Building

The review suggests that artificial intelligence and machine learning could speed up the selection of materials and help manage windows after installation. One possible system would connect the glass to sensors, weather forecasts, information about room occupancy, and the building’s heating and cooling equipment. The window would then work as part of the building rather than in isolation, changing its optical and thermal properties in response to expected conditions and actual needs.

Automated control, however, cannot solve durability or manufacturing-cost problems on its own, nor can it prove that projected energy savings will occur everywhere. Long-term studies are needed to track energy use and indoor comfort and compare performance across different climate regions. Researchers must also consider daylight and clear views alongside reductions in heat load, so that energy savings do not come at the expense of the quality of indoor spaces.

The Bottom Line

Smart windows could turn glass from a passive barrier into a surface that responds to sunlight and temperature through electric heating, radiative cooling, or selective control of different wavelengths. Results ranging from simulated savings of up to 34% in heating, ventilation, and air-conditioning energy use to applications in cars and greenhouses suggest considerable potential. But those figures do not remove the need to demonstrate performance outside the lab. Windows must remain transparent, reliable, and effective for decades. The real test will be whether the technology can reduce energy use while preserving everyday comfort and lasting in actual buildings.